ANYCUBIC Photon Mono X 6Ks Resin 3D Printer, 9.1'' 6K Monochrome Screen LCD SLA Resin Printer with Upgraded LighTurbo Matrix, Large Print Volume 7.7'' x 4.8'' x 7.8''
【9.1 inch 6K Screen】ANYCUBIC Photon Mono X 6Ks resin printer uses a 9.1” 6K mono screen with a HD resolution of 5760*3600 and a high contrast ratio of 380:1, bringing sharper and delicate details. Comes with a high light transmittance anti-scratch film protector, effectively protecting the screen from wearing and scratches while ensuring printing accuracy. One free extra piece included for easy replacement.
【Large Printing Dimension】The printing size of ANYCUBIC Photon Mono X 6Ks resin 3d printer is 195.84X122.4X200mm, so you can print small models in one batch to improve the printing efficiency. And the max printing volume is up to 4.76L, making it even more convenient for printing large-sized models.
【Upgraded LighTurbo Matrix】The upgraded Anycubic LighTurbo matrix light source and high-precision textured optical lens provide a stable and even parallel light source, effectively removing optical layers and grid lines to create a smooth and delicate model surface. The max printing speed reaches 60 mm/h, completing your 3d printing models even sooner.
【Stable Printing Sturcture】Photon Mono X 6Ks 3d resin printer adopts dual-linear Z-axis rail and highly wear-resistant POM anti-backlash nuts, restraining the Z-axis' stability to the micron level, effectively eliminating printing layers and ensuring printing details. Laser-engraved platform has better adhesion than sandblasting ones, greatly reducing fall-offs and warping-ups, bringing you an even better success rate.
【Upgraded Slicer software】Anycubic Photon Workshop 3.0 brings you an even better slicing experience in punching, supporting, shelling and layout arranging. Simplified UI interface makes slicing easier. The new model repairing function also helps boost the printing success rate. Free to use permanently.
【After Sales Service】We provide you wit

ANYCUBIC Wash and Cure 3, Newest Upgraded Volume 2 in 1 Wash and Cure Station, with Gooseneck Lights, for Mars Anycubic Photon Mono 4K 2 LCD SLA DLP 3D Printer, Washing Size of 165 x 100 x180 mm
【Larger Size for Upgraded Capacity】Compared to Anycubic Wash & Cure 2.0, Wash and Cure 3.0 has an impressive 42% increase in cleaning basket capacity, this makes it perfectly tailored for LCD (light-curing) 3D printers with a size of 7.3 inches or less. The volume of the cleaning bucket has also increased to 4L, meeting the cleaning needs of larger and more 3d models.
【Gooseneck Light Design】The "Innovative Flexicure Gooseneck Light Design" of ANYCUBIC increases the energy value by 30,000uW/cm² within a 1-3 cm irradiation range, significantly strengthening the curing effect on subtle areas such as the top of models and the hem of garments.
【Dual-layer Design, IPA Saving】The double-layered PP material cleaning basket is designed to support cleaning with defferent platforms. It features two adjustable heights at 100mm and 165mm, providing flexibility to accommodate printing platforms ranging from 5.9 inches to 7.3 inches. This design also maximizes the efficiency of IPA usage.
【Enhanced Curing Power】By utilizing a new bead arrangement and lens light source, Wash & Cure 3.0 offers a 20%* improvement in curing uniformity over the previous generation 2.0. This results in a more thorough and comprehensive curing of the entire model.
【Quiet and Simple】Cleaning and curing dual modes, easily selected with one click; Gooseneck light curing mode can be easily toggled on and off with one click. Adjustable from 1 to 30 minutes at will. After the closed structure design and software optimization, machine can effectively reduce the cleaning, curing noise interference, to create a quieter and more comfortable working environment.

Photon Mono 2 Build Plate,UniTak3D Textured Printing Platform 3D Printer Accessories Upgrades ONLY Compatible with ANYCUBIC Photon Mono 2 LCD Resin 3D Printer
【Application】:The 3D Printer Platform is a direct replacement for ANYCUBIC Photon Mono 2 LCD UV 3D printers.
【La-ser Carving Treatment】:With textured finish on the platform surface,the aluminum alloy build plate has much flat surface and better adhesion,which can not only improve the printing accuracy but also makes it easier to remove the prints.
【Perfect Spare Replacement】:When your completed printing platform is in the curing&washing machine ,you could install this spare platform to continue the second print.
【Easy Installation】:Just use one knob to install or remove the platform from your 3D printer as the same as the original one.
【Notice】:After installation, please remember to level your printing platform before your first print.

ELEGOO MARS 4 DLP 3D Printer, Desktop Resin 3D Printer with Ultra-quiet Printing, Over 20,000 Hours Service Life, and Ultra-low Operating Power, Printing Size of 132.8x74.7x150mm/5.22x2.94x5.9in
Brand New DLP 3D Printer: ELEGOO MARS 4 DLP 3D printer adopts TI (Texas Instruments) DLP technology to project the 405nm beam directly and concentratedly onto the bottom of the resin tank with up to 95% light uniformity. Tempered glass replaces traditional LCD screens with up to 95% light transmittance, effectively reducing light diffusion and stray light interference.
More Than 20,000 Hours Lifespan: The service life of the DLP projector is as long as > 20,000 hours, 10 times longer than the 2,000 hours lifespan of an LCD screen, which means you will save a lot of maintenance costs for replacing your LCD printer's screen.
Low Power & Ultra-quiet Printing: 12W ultra-low operating power is energy-saving and eco-friendly, with about 1/7 energy consumption of LCD printers. Since lower power consumption generates less heat, there is no need for a cooling fan to dissipate heat, reducing print noise below 48 dB.
More Stable Structure: The Z-axis linear rail is thickened from 15mm to 20mm, which effectively reduces the vibration amplitude during Z-axis movement and the layer pattern of printed models for better final print results. Sandblasted surface build plate with strong adhesion to improve the printing success rate.Meanwhile, the full-gray anti-aliasing algorithm greatly reduces the jagged edges, making the model surface smoother and more delicate.
Smart Voxeldance Tango Slicer: Three printing modes are optional: static mode and dynamic mode (including smooth and high-speed mode). In dynamic mode, the slicing software will dynamically adjust the printing speed by the cross-sectional size of the printed model to reduce the impact of the release force, thereby improving the printing efficiency. In addition, ELEGOO self-developed a new open-source GOO slicing format, which is com

Dell P2423D 24 Inch QHD (2560x1440) Monitor, 60Hz, IPS, 5ms, 99% sRGB, DisplayPort, HDMI, 5x USB, 3 Year Warranty, Black
DELL-P2423D
Model Number: P2423D
Black

Nike Nike Air Max Axis (ps), Boy's Running Shoe, Iced Lilac/Photon Dust/Soar, 10.5 Child UK (28 EU)

ELEGOO Resin 3D Printer, Mars 3 MSLA 3D Printers with 6.66 inches Ultra 4K LCD and Ultra-high Printing Accuracy for Beginners, Print Size 143 * 89 * 175mm³
【Higher resolution and output】Mars 3 is ELEGOO's first desktop mSLA 3D printer with super-high precision. It adopts a 6.66 inches mono LCD with Ultra 4K HD resolution, which has a 30% higher XY resolution at 35μm and 37% higher build volume than Mars 2, delivering amazing 3D prints.
【The release film 2.0】With less release tension, the small and thin supports added to your model will be well-protected. Mars 3 has a greatly improved success rate when printing 3D models with lots of details.
【Upgraded light source】 36 highly integrated LED lights with a brand new COB lens that has a free-form surface can deliver over 90% uniformity of UV light illumination , making the printing accuracy upgraded to another level.
【Optimized heat sink unit】ELEGOO Mars 3 adopts copper tubes in the heat sink unit working with a high-quality cooling fan, which significantly improves the heat dissipation performance and brings down the light decay to less than 5% after 6000hours printing, extending the longevity of the UV LED lights.
【Chitubox Pro free trial】Mars 3 comes with a 1-year free trial of Chitubox Pro slicer that worths 169USD. Chitubox Pro has loads of great upgrades from automatic supports to model repair tools, which helps both professional 3d printing labs and novices to maximize your output.Lychee Slicer is now also compatible with Mars 3.

ELEGOO Mercury Plus 2 in 1 Wash and Curing Machine Station V2 for Mars Photon S Photon Mono LCD/DLP/SLA 3D Printers Printed Models
【Upgrade Protection Function】Sealed washing to prevent the volatilization of alcohol during the cleaning process . Fan-less curing mode makes it quieter to use. The anti-UV lid can block 99.95% of ultraviolet rays to protect your eyes.
【Intelligent Curing and Washing】The front TFT screen can directly display the setting time and remaining time, and the operation is simple and intuitive. With built-in 16 pcs of 405nm UV LED and a 360-degree rotating turntable, you can uniformly cure the model.
【Flexible Washing Mode】The models can be placed in a cleaning basket to be cleaned separately, or mount the build plate with models on it and wash them together, which can avoid direct contact with the uncured resin. The height of the platform bracket can be adjusted to fit the liquid level in the bucket.
【Ideal Compatibility】Compatible with most of the LCD/DLP/SLA 3D printers like ELEGOO Mars, Mars Pro, Mars C, Photon, Photon s etc, which provides you an ideal support for washing and curing your 3D resin prints.
【Special Notes】The washing function is not quite suitable for 3D models printed with water washable resin, which is better to be washed with running water.