ANYCUBIC Photon Mono 2 Resin 3D Printer, LCD UV Photocuring Resin Printer with 6.6” 4K+ Monochrome LCD, Upgraded LighTurbo Matrix, Large Printing Size 143x89x165mm³
【6.6'' 4K+ Monochrome LCD】ANYCUBIC Photon Mono 2 adopts a 6.6inch 4k+ monochrome LCD screen with a HD resolution of 4096*2560, which can better restore 3d printing models and present more subtle details. The ultra-large scratch-resistant screen protector helps to prevent screen scratches and resin penetration. With up to 95% light transmittance, it can fully protect the LCD screen while ensuring printing accuracy.
【Larger Print Volume】ANYCUBIC Photon Mono 2 resin 3d printer has a printing size of 143x89x165 mm/5.6” x 3.5” x 6.5”, 20% larger than Photon Mono 4K, the exposure time of single-layer printing is shortened to 1.5s-3s, greatly saving your time and improving printing efficiency. Photon Mono 2 providing users with more space and freedom to create freely.
【Upgraded LighTurbo Matrix】The upgraded LighTurbo matrix adopts a high-precision texturing optical lens, provides a stable and uniform parallel light source, thus effectively reducing the layer lines and eliminating grid lines. Therefore, Photon Mono 2 resin 3d printer can make the model details more vivid and make the model surface delicate and smooth.
【Photon Workshop Slicer 3.0】Photon Workshop 3.0 will be included with the purchased Photon Mono 2 resin printer, which is free to use permanently. It has enhanced and upgraded core features such as slicing, punching, support adding, shells extracting and model arrangement. It also adds various features , such as model repair, significantly improving the slicing efficiency and printing success rate.
【Laser-engraved Build Plate】Mono 2 is equipped with a laser engraved platform, which has excellent flatness that can increase model adhesion, making the 3d model hard to drop and warp. When printing on Photon Mono 2 using different resins, it’s recommended to match the corresponding printing parameters,

ELEGOO MARS 4 DLP 3D Printer, Desktop Resin 3D Printer with Ultra-quiet Printing, Over 20,000 Hours Service Life, and Ultra-low Operating Power, Printing Size of 132.8x74.7x150mm/5.22x2.94x5.9in
Brand New DLP 3D Printer: ELEGOO MARS 4 DLP 3D printer adopts TI (Texas Instruments) DLP technology to project the 405nm beam directly and concentratedly onto the bottom of the resin tank with up to 95% light uniformity. Tempered glass replaces traditional LCD screens with up to 95% light transmittance, effectively reducing light diffusion and stray light interference.
More Than 20,000 Hours Lifespan: The service life of the DLP projector is as long as > 20,000 hours, 10 times longer than the 2,000 hours lifespan of an LCD screen, which means you will save a lot of maintenance costs for replacing your LCD printer's screen.
Low Power & Ultra-quiet Printing: 12W ultra-low operating power is energy-saving and eco-friendly, with about 1/7 energy consumption of LCD printers. Since lower power consumption generates less heat, there is no need for a cooling fan to dissipate heat, reducing print noise below 48 dB.
More Stable Structure: The Z-axis linear rail is thickened from 15mm to 20mm, which effectively reduces the vibration amplitude during Z-axis movement and the layer pattern of printed models for better final print results. Sandblasted surface build plate with strong adhesion to improve the printing success rate.Meanwhile, the full-gray anti-aliasing algorithm greatly reduces the jagged edges, making the model surface smoother and more delicate.
Smart Voxeldance Tango Slicer: Three printing modes are optional: static mode and dynamic mode (including smooth and high-speed mode). In dynamic mode, the slicing software will dynamically adjust the printing speed by the cross-sectional size of the printed model to reduce the impact of the release force, thereby improving the printing efficiency. In addition, ELEGOO self-developed a new open-source GOO slicing format, which is com

ANYCUBIC Photon Mono X 6Ks Resin 3D Printer, 9.1'' 6K Monochrome Screen LCD SLA Resin Printer with Upgraded LighTurbo Matrix, Large Print Volume 7.7'' x 4.8'' x 7.8''
【9.1 inch 6K Screen】ANYCUBIC Photon Mono X 6Ks resin printer uses a 9.1” 6K mono screen with a HD resolution of 5760*3600 and a high contrast ratio of 380:1, bringing sharper and delicate details. Comes with a high light transmittance anti-scratch film protector, effectively protecting the screen from wearing and scratches while ensuring printing accuracy. One free extra piece included for easy replacement.
【Large Printing Dimension】The printing size of ANYCUBIC Photon Mono X 6Ks resin 3d printer is 195.84X122.4X200mm, so you can print small models in one batch to improve the printing efficiency. And the max printing volume is up to 4.76L, making it even more convenient for printing large-sized models.
【Upgraded LighTurbo Matrix】The upgraded Anycubic LighTurbo matrix light source and high-precision textured optical lens provide a stable and even parallel light source, effectively removing optical layers and grid lines to create a smooth and delicate model surface. The max printing speed reaches 60 mm/h, completing your 3d printing models even sooner.
【Stable Printing Sturcture】Photon Mono X 6Ks 3d resin printer adopts dual-linear Z-axis rail and highly wear-resistant POM anti-backlash nuts, restraining the Z-axis' stability to the micron level, effectively eliminating printing layers and ensuring printing details. Laser-engraved platform has better adhesion than sandblasting ones, greatly reducing fall-offs and warping-ups, bringing you an even better success rate.
【Upgraded Slicer software】Anycubic Photon Workshop 3.0 brings you an even better slicing experience in punching, supporting, shelling and layout arranging. Simplified UI interface makes slicing easier. The new model repairing function also helps boost the printing success rate. Free to use permanently.
【After Sales Service】We provide you wit

SUNLU 3D Printer Enclosure, Constant 3D Printing Temperature for ABS 3D Printer Filament, CR10 3D Printer Cover, Provide Plenty of Room, Fireproof, Easy to Install, Size 700 * 750 * 900mm
①【Provide Plenty of Room for 3D Printers】SUNLU 3D Printer Enclosure size 35.43"×29.53"×27.56" dimensions compatible with most of 3D printers with heat-bed size smaller than 310*310mm, CR10/S9/S9 PLUS/S8/S8 PLUS/LGT Longer LK5 Pro/ADIMLab Gantry Pro 3D Printer.
②【Constant Temperature Protective】SUNLU 3D Printer Enclosure keep a constant temperature 3D printing environment, mading a significant improvement in 3D prints,especially ABS 3D printer filaments. Keeps 3D prints and printer warm in cold room. Good 3D printing effect, Good adhesion, No layer shift, Smooth print, No Warping.
③【Multiple Protection】Waterproof glass fabric cloth avoids the moisture effects on 3D printing quality. Aluminum foil inside resists 600°C-800°C, hold heat safely. Fireproof flame-retardant material avoids accidental fire and spread. Separate space avoid dust effect the printing quality. SUNLU 3D Printer Enclosure also helps a lot with the smell that comes with 3D resins.
④【User-friendly Design】SUNLU 3D Printer Enclosure has a visible viewing window that allows you to observe the 3D printing process. On the left side there is a storage pocket of 8.27inch*7.48inch for 3D printer tools and accessories. On the right side there is a Velcro flip-up operating window that allows access to the 3D printer with less heat loss.
⑤【Easy to Assemble and Sturdy】Easy to assemble and remove with clear instruction. 5 minutes quick installation. No extra tools required, assembled without glue, fiberglass rods supports the tent stablely, with good toughness.

ELEGOO MARS 4 Max MSLA 3D Printer, UV Resin Photocuring Printer with 9.1-inch 6K Monochrome LCD, Double Cooling Fans, Multiple Print Modes, Printing Size of 195.84x122.4x150mm / 7.71x4.81x5.9 Inches
【9.1-inch 6K Mono LCD】ELEGOO MARS 4 Max features a 9.1-inch monochrome LCD screen with a resolution of 5760x3600 and an XY resolution of 34um, and printing speed up to 70mm/H. The 9H hardness tempered glass with excellent light transmission protects the LCD screen from scratches and damage caused by resin dripping or penetration.
【COB+ Refractive Light Source】MARS 4 Max adopts the COB+ refractive light source to ensure that the emitted 405nm wavelength beam is more vertical and uniform on the entire LCD screen after refraction. Paired with the full grayscale anti-aliasing algorithm to make printed models with finer and more realistic details and a smoother surface.
【Large Build Volume】The large build volume of 195.84x122.4x150mm (7.71x4.81x5.9 inches) provides you with more creative space to print a large model or print multiple parts in batches, thus increasing your productivity.
【Efficient Heat Dissipation】Double fan cooling system design, one for air inlet and the other for air outlet, has faster air circulation and higher heat dissipation efficiency, which extends the service life of 3D printers.
【Voxeldance Tango Software】It has 3 printing modes: static mode and dynamic mode (including smooth and high-speed mode). In dynamic mode, when the printed model cross-section is small, the print lifting speed is faster to improve printing efficiency; on the contrary, the printing speed will slow down. Combined with ELEGOO self-developed new open-source GOO slicing format, which supports multiple slicing software without restriction.
【Refreshing Printing Environment】The plug-in air purifier with a built-in activated carbon filter reduces resin stink for a refreshing printing environment. In addition, ELEGOO's first large-sized air purifier (210x247x410mm) with 95% VOC purific

Purple Dragon Rose Gold Hairdressing Scissors Set 5.5 Inch Hair Cutting & Thinning Scissors Kit for Men Women Kids Home Salon Barber
Premium Material Scissors -- Purple Dragon rose gold hairdressing scissors set are made of premium 440C stainless Steel. The hair scissors are hand-sharpened to make the blades line even and smooth. Convex edges for a smooth cutting action, perfect for slicing wet or dry hair.
Hair Thinning Scissors -- The texturizing scissors have 28 V-type teeth on one side to get a 20-25% thinning rate and smooth sharp blade on the other side. The hair scissors measure 5.5 inch with cutting blades that measure 2.3 inch.
Adjustable Screw -- Equipped with a adjustable dial with tension system for proper tension and comfortable use. Optimally adjusted tension ensures smooth opening and closing and a gentle cut. A golden removable finger rest is comfortable for little finger.
Multifunctional - The sharp hair scissors make the barber hair thinning scissor safer and easier to use on men, women, the elderly, children, and babies. Hair cutting shears is made with the latest design for professional use as well as personal use. Its professional coating prevents the steel from rust.
What You Can Get -- 1 Hair Cutting Scissor, 1 Hair Thinning Scissor and some accessories: 2 Hair Combs, 1 Hair Clips, 1 Gift Bag, 1 Cleaning Cloth, 1 Scissors Adjuster, 1 Razor（The colors of accessories are random). If you have any problems with our hairdressing scissors set, our professional customer service team will assist you in 24 hours.

Purple Dragon Purple Hairdressing Scissors Set 5.5 Inch Hair Cutting & Thinning Scissors Kit for Men Women Kids Home Salon Barber
Premium Material Scissors -- Purple Dragon purple hairdressing scissors set are made of premium 440C stainless Steel. The hair scissors are hand-sharpened to make the blades line even and smooth. Convex edges for a smooth cutting action, perfect for slicing wet or dry hair.
Hair Thinning Scissors -- The texturizing scissors have 28 V-type teeth on one side to get a 20-25% thinning rate and smooth sharp blade on the other side. The hair scissors measure 5.5 inch with cutting blades that measure 2.3 inch.
Adjustable Screw -- Equipped with a adjustable dial with tension system for proper tension and comfortable use. Optimally adjusted tension ensures smooth opening and closing and a gentle cut. A golden removable finger rest is comfortable for little finger.
Multifunctional - The sharp hair scissors make the barber hair thinning scissor safer and easier to use on men, women, the elderly, children, and babies. Hair cutting shears is made with the latest design for professional use as well as personal use. Its professional coating prevents the steel from rust
What You Can Get -- 1 Hair Cutting Scissor, 1 Hair Thinning Scissor and some accessories: 2 Hair Combs, 1 Hair Clips, 1 Gift Bag, 1 Cleaning Cloth, 1 Scissors Adjuster, 1 Razor（The colors of accessories are random). If you have any problems with our hairdressing scissors set, our professional customer service team will assist you in 24 hours.

QIDI TECH i Fast FDM 3D Printer, Industrial Grade Structure, with Dual Extruder for Fast Printing, Filament Detection,5 Inch Touch Screen,Wifi Connection,Super Large Print Size 360×250×320mm
Faster printing . Fully industrial-grade structure, using the second-generation Qidi dual Z-axis structure, all of the original motion structure is upgraded to linear guides, with the all metal high temp extruder, the filament extruding is faster and smoother, the printing accuracy is higher .The printing speed is increased by 20%, it is set to print easily at 100 cc.
Freedom in the choice of the filament: iFast can print almost all kinds of filaments which suitable for FDM 3D printers on the market, such as PLA ,PLA+ ,ABS ,PETG, NYLON,etc. The iFast 3d printer equipped with a heated chamber, which can be heated to 60°C. The excellent mechanical structure can produce more robust manufacturing-grade parts.
Freedom in manufacturing of the complex parts . iFast is equipped with automatic dual extruder, which can automatically adjust the left and right extruder up and down according to the software. With the PVA (water-soluble) support, it is very suitable for printing manufacturing-level parts with complex structures and realizing precision manufacturing.
All metal high temp extruder. Compared with the normal brass nozzles which on the market, it is more durable and prints smoother. The iFast 3d printer is pre-installed with dual extruder, and the print size is 330×250×320mm.
Excellent user experience.It’s equipped with self-developed QIDI slicing software, two modes can be selected: normal mode and expert mode. The normal mode is suitable for novices, the parameter system has been intelligently set, no other operations are required, it is very simple. Expert mode is suitable for experienced users, who can deeply participate in modifying parameters and personalized printing models.

Professional Hair Scissors, Hairdressing Scissors, Barber Scissor Suitable for All Hair Cutting, Black, 5.5 inch - Includes Presentation Case, Tip Protector, Hair Comb
Achieve Salon-Quality Results with Sanguine's Ultra-Sharp Japanese Hairdressing Scissors - No More Split Ends Guaranteed.
Get Healthier Hair Growth with Our Convex Blade Hairdressing Scissors - No More Snapping, Only Cutting.
Effortlessly Cut All Hair Types with our Hairdressing Scissors - Suitable for Wet and Dry Hair, Ideal for Slicing Techniques and Beards/Moustaches
Sharp and Long-lasting: Our professional hairdressing scissors are hand-sharpened using premium Japanese steel (J2), ensuring a sharp, precise cut every time. With proper care, they'll retain their sharpness longer than ordinary scissors. No screwdriver or key required, the adjustable tension screw can be adjusted by hand with ease.
Complete with a Color-Coordinated Presentation Case, these Scissors Weigh 45-50 g and Feature a Black Finish. The Adjustable Screw System and Finger Rest Bar Ensure Comfort and Customization for Every Cut.